Home / Service Areas / Georgetown, TX
Forestry Mulcher Rental in Georgetown, TX
One of the fastest-growing cities in America, ringed by cedar breaks and heritage oak country. Georgetown clearing means working fast without touching the trees the ordinance protects.
What gets cleared around Georgetown
- Phase clearing under tree preservation plans
- Cedar clearing on San Gabriel river tracts
- Estate lot selective clearing
- Ranch conversion ahead of development
Georgetown’s clearing work divides between the uplands and the river. On the divides it is juniper-oak over limestone, dense and even-aged where ranching stopped decades ago. Along the North and South San Gabriel it changes completely — pecan, hackberry and cedar elm in the bottoms, over soft ground and root plates that will not tolerate a heavy machine. The city’s tree preservation rules add a third constraint: protected and heritage trees have to survive the operation, which means mulching to a dripline and stopping rather than clearing to a fence line. If the tract holds mature juniper-oak canopy, the window matters. Read cedar clearing season in Texas before you set dates.
The right machine for Georgetown projects
Tree preservation work is Fecon 150 territory: agile enough to mulch to the dripline and stop. Raw-land phases north and west of town run faster under a PT-175 or, at scale, a high-HP machine.
Not sure where your project lands? The machine finder applies the same logic in seven questions, or read the full decision guide.
Rent the machine, or hire it done
Central Texas has plenty of experienced dirt contractors, and for them rental is usually the better math. But most cedar-clearing calls we get here are from landowners without a forestry operator on staff. If that’s you, turnkey service is almost always cheaper than learning on a rented machine. The honest math on both paths is in our rent vs hire guide.
Start with the cost guide for real per-acre numbers, then run your acreage through the cost calculator before you call.
| Option | Rate | Best for |
|---|---|---|
| High HP dedicated rental | $14,000/wk · $34,000/mo | Most popular: 25+ acres, heavy stems, deadlines |
| Mid-size dedicated rental | $11,000/wk · $32,000/mo | Lighter brush, 10–25 acre projects |
| CAT 275 XE rental | $1,750/day · $8,000/wk | Under 15 acres, tight access |
| Turnkey, high-HP with operator | $4,000/day + transport | Big acreage, no operator |
| Turnkey, skid steer with operator | $3,000/day incl. transport | Small projects, hands-off |
Machines we send to Georgetown
Ashe juniper over limestone is hard on teeth and hard on hydraulics. These are the machines we send to Georgetown projects, and what each one is for.
- Barko 930B — high-horsepower dedicated mulcher
- Tigercat M726G — high-horsepower dedicated mulcher
- Weiler M860A — high-horsepower dedicated mulcher
- CAT 275 XE + FAE forestry mulcher — skid steer, tight access
- Primetech PT-175 — mid-size dedicated mulcher
- CMI 175 — mid-size dedicated mulcher
- Fecon 150 — mid-size dedicated mulcher
Insurance for Georgetown rentals
Dedicated machines: $500,000 inland marine + $2,000,000 general liability. CAT 275 XE: $250,000 inland marine + $2,000,000 general liability. Turnkey service requires none of it. Full requirements →
Georgetown forestry mulching questions
Rates are the same across Texas: high-HP dedicated mulchers at $14,000/week, mid-size dedicated at $11,000/week, and the CAT 275 XE at $1,750/day or $8,000/week. Transport to Williamson County is quoted separately by distance. See the full rate card.
Yes. Our operators run high-HP dedicated mulching at $4,000 per 8-hour day plus transport, or skid steer mulching at $3,000/day with transport included. Central Texas has plenty of experienced dirt contractors, and for them rental is usually the better math. But most cedar-clearing calls we get here are from landowners without a forestry operator on staff. If that’s you, turnkey service is almost always cheaper than learning on a rented machine.
Dedicated mulchers require $500,000 inland marine coverage and $2,000,000 general liability; the CAT 275 XE requires $250,000 inland marine and $2,000,000 general liability. Certificates must name Pierce Equipment Rentals as loss payee and additional insured before delivery. Our insurance guide walks through getting certificates issued fast.
Two distinct kinds. Phase clearing on raw land north and west of town, where production per day is what matters, and selective work on estate lots and San Gabriel river tracts where a tree preservation plan governs what stays standing. The second kind takes considerably longer per acre and rewards a smaller, more precise machine over a faster one.
Nearby service areas
Clearing land near Georgetown? Let's talk.
Acreage, vegetation, dates. One call gets you a machine recommendation and a delivered quote.