Forestry Mulcher Rental in Fort Worth, TX
Where the West begins, and where the mesquite begins with it. Fort Worth work runs from urban pads to genuine rangeland inside a half-hour drive.
Two ecoregions, one city
- Rangeland mesquite clearing west of the city
- Subdivision phases in fast-growing suburbs
- Industrial site prep along the rail corridors
- Ranch and recreational land cleanup
Fort Worth sits on the line the region is named for. East of the city the Eastern Cross Timbers carry post oak and blackjack oak on sandy soil; west of it the Fort Worth Prairie opens out and mesquite takes over. Those two jobs behave nothing alike. Post oak is slow, dense grinding that rewards horsepower, while mesquite is thorny, multi-stemmed and low, with root crowns that will stall a machine that is only powerful on paper. Knowing which side of town a tract sits on tells you more about the day rate than the acreage does.
Post oak grinds, mesquite grabs
Mesquite rangeland is CMI 175 country: simple, tough, and productive in thorny brush. Development phases at scale, and hard-deadline industrial work, justify the high-HP fleet.
Not sure where your project lands? The machine finder applies the same logic in seven questions, or read the full decision guide.
Rent the machine, or hire it done
Fort Worth is really two rental markets. Ranch and rangeland work west of the city is acreage work that rewards a high-HP machine on a monthly rental. Subdivision phases and industrial site prep in and around the city are scheduled work that suits weekly or monthly. Smaller recreational and ranch cleanup jobs go turnkey at $3,000 a day with transport included. Which side of the city you are on changes the answer more than the acreage does. The rent vs hire guide sets out the trade.
Pricing a Fort Worth job? The forestry mulching cost guide explains what moves the per-acre number, and the rate sheet shows what a Weiler M860A runs with and without an operator.
| Option | Rate | Best for |
|---|---|---|
| High HP dedicated rental | $14,000/wk · $34,000/mo | Most popular: 25+ acres, heavy stems, deadlines |
| Mid-size dedicated rental | $11,000/wk · $32,000/mo | Lighter brush, 10–25 acre projects |
| CAT 275 XE rental | $1,750/day · $8,000/wk | Under 15 acres, tight access |
| Turnkey, high-HP with operator | $4,000/day + transport | Big acreage, no operator |
| Turnkey, skid steer with operator | $3,000/day incl. transport | Small projects, hands-off |
Rates are the same in every market we serve. See the full rate card for what the rate excludes and how transport is quoted.
Machines we send into Tarrant County
Post oak, mesquite and cross timbers regrowth around Fort Worth reward torque over travel speed. Here is the fleet, and where each machine earns its rate.
- Barko 930B — high-horsepower dedicated mulcher
- Tigercat M726G — high-horsepower dedicated mulcher
- Weiler M860A — high-horsepower dedicated mulcher
- CAT 275 XE + FAE forestry mulcher — skid steer, tight access
- Primetech PT-175 — mid-size dedicated mulcher
- CMI 175 — mid-size dedicated mulcher
- Fecon 150 — mid-size dedicated mulcher
Insurance for Fort Worth rentals
Dedicated machines: $500,000 inland marine + $2,000,000 general liability. CAT 275 XE: $250,000 inland marine + $2,000,000 general liability. Turnkey service requires none of it. Full requirements →
Fort Worth and Tarrant County questions
Look at the soil and the trees. Sandy ground with post oak and blackjack means you are in the Eastern Cross Timbers, east and north of the city. Heavier ground opening out with mesquite and prickly pear means you are on the Fort Worth Prairie to the west. It matters because the two clear at very different rates — post oak is dense, slow grinding that rewards horsepower, while mesquite is lower, thorny and multi-stemmed. Tell us which you have and the day-rate estimate will actually hold.
Yes. Mesquite resprouts from a root crown below the soil surface that no mulching head reaches, so west of the city a pass is a reset rather than a cure — open, usable ground with nothing to burn or haul, and regrowth to manage afterwards. Post oak east of the city behaves differently and does not come back the same way. Plan follow-up treatment on the prairie side and budget for it at the start.
On open prairie mesquite, three to five acres a day with a high-HP dedicated machine, more where the stand is light. In dense post oak, expect meaningfully less — it is hard, continuous material and production drops. The CAT 275 XE runs closer to half an acre to an acre and a half a day in either, which is why it belongs on lanes, lots and access rather than acreage.
Rental is $14,000 a week high-HP, $11,000 mid-size, $1,750 a day or $8,000 a week for the CAT 275 XE. Transport within DFW is short. Turnkey is $4,000 a day high-HP plus transport, or $3,000 a day skid steer with transport included.
Tarrant County and the wider metroplex and prairie — Dallas, Arlington, Weatherford, Granbury, Cleburne, Decatur, Denton, Midlothian, Waxahachie and out to Breckenridge and Palo Pinto.
Nearby service areas
Clearing land near Fort Worth? Let's talk.
Acreage, vegetation, dates. One call gets you a machine recommendation and a delivered quote.