Skip to main content

Home / Service Areas / McKinney, TX

Dallas–Fort Worth · Collin County

Forestry Mulcher Rental in McKinney, TX

McKinney’s growth is pushing into genuine countryside: post oak groves, old fence lines, and bois d’arc thickets that have never seen a machine.

What gets cleared around McKinney

McKinney’s growth is moving into ground that has genuinely never been cleared, and bois d’arc is what makes it distinctive. Osage orange was planted in fence rows across Collin County a century ago and has spread from them ever since. The wood is among the hardest in North America, it dulls teeth faster than anything else on a typical North Texas job, and the thickets hide old net wire from the original fence lines. Post oak groves and mixed brush fill the rest. First-cut clearing here is slower and harder on wear parts than the acreage suggests.

The right machine for McKinney projects

First-cut clearing on raw tracts favors mid-size dedicated machines; bois d’arc is dense wood, and the CMI 175 handles it without complaint. Estate work under oak canopy suits the Fecon 150.

Not sure where your project lands? The machine finder applies the same logic in seven questions, or read the full decision guide.

Machine at work near Brownsville, real project photo

Rent the machine, or hire it done

The Metroplex has deep contractor talent, and builders with their own operators rent from us weekly and monthly. Landowners on the rural edges, Parker, Ellis, and Johnson counties especially, more often take turnkey and skip the insurance paperwork entirely. The honest math on both paths is in our rent vs hire guide.

Pricing a McKinney job? The forestry mulching cost guide explains what moves the per-acre number, and the rate sheet shows what a Weiler M860A runs with and without an operator.

Rates for McKinney projects
OptionRateBest for
High HP dedicated rental$14,000/wk · $34,000/moMost popular: 25+ acres, heavy stems, deadlines
Mid-size dedicated rental$11,000/wk · $32,000/moLighter brush, 10–25 acre projects
CAT 275 XE rental$1,750/day · $8,000/wkUnder 15 acres, tight access
Turnkey, high-HP with operator$4,000/day + transportBig acreage, no operator
Turnkey, skid steer with operator$3,000/day incl. transportSmall projects, hands-off

Machines we send to McKinney

Post oak, mesquite and cross timbers regrowth around McKinney reward torque over travel speed. Here is the fleet, and where each machine earns its rate.

Insurance for McKinney rentals

Dedicated machines: $500,000 inland marine + $2,000,000 general liability. CAT 275 XE: $250,000 inland marine + $2,000,000 general liability. Turnkey service requires none of it. Full requirements →

McKinney forestry mulching questions

Rates are the same across Texas: high-HP dedicated mulchers at $14,000/week, mid-size dedicated at $11,000/week, and the CAT 275 XE at $1,750/day or $8,000/week. Transport to Collin County is quoted separately by distance. See the full rate card.

Yes. Our operators run high-HP dedicated mulching at $4,000 per 8-hour day plus transport, or skid steer mulching at $3,000/day with transport included. The Metroplex has deep contractor talent, and builders with their own operators rent from us weekly and monthly. Landowners on the rural edges, Parker, Ellis, and Johnson counties especially, more often take turnkey and skip the insurance paperwork entirely.

Dedicated mulchers require $500,000 inland marine coverage and $2,000,000 general liability; the CAT 275 XE requires $250,000 inland marine and $2,000,000 general liability. Certificates must name Pierce Equipment Rentals as loss payee and additional insured before delivery. Our insurance guide walks through getting certificates issued fast.

Raw-land subdivision phases, post oak and bois d’arc thicket clearing, rural estate and ranchette prep, and highway frontage commercial work. Bois d’arc is the wear-part story around McKinney and it is worth pricing in before the machine arrives.

Check availability

Clearing land near McKinney? Let's talk.

Acreage, vegetation, dates. One call gets you a machine recommendation and a delivered quote.