Forestry Mulcher Rental in Waco, TX
Halfway between Austin and Dallas and growing from both directions. Waco clearing runs from Brazos bottom hardwoods to cedar ridges west of town.
What gets cleared around Waco
- Subdivision and commercial phases along I-35
- Brazos and Bosque bottom clearing
- Cedar ridge clearing west of town
- University-area and infill tracts
McLennan County gives you three distinct clearing jobs inside half an hour. The Brazos and Bosque bottoms carry big pecan, hackberry and cottonwood over soft ground with heavy vine growth. The prairie between them is blackland with post oak and secondary brush. West of town the ground lifts into limestone and becomes genuine cedar country. Those want different machines and different day rates, so the first question on a Waco job is usually which of the three a tract actually sits in — the acreage tells you far less than the location does.
Solar site prep differs from pasture and development clearing mainly in tolerance. The array footprint has to finish uniform, the access roads and laydown yards have to be ready first, and the sequence belongs to the civil contractor. Our solar site clearing page covers how we scope that.
The right machine for Waco projects
Corridor development runs on mid-size dedicated machines: the PT-175 on wet bottoms, the CMI 175 on cedar ridges. Infill and estate work in town takes the 275 XE.
Not sure where your project lands? The machine finder applies the same logic in seven questions, or read the full decision guide.
Rent the machine, or hire it done
The corridor’s growth means both contractors and landowners are clearing at record pace. Builders with crews rent mid-size machines by the week; landowners a few miles off the interstate usually take turnkey and get finished results without touching a machine. The honest math on both paths is in our rent vs hire guide.
The forestry mulching cost guide covers what the work costs per acre around Waco, and the Weiler M860A rate sheet lists rental and turnkey pricing side by side.
| Option | Rate | Best for |
|---|---|---|
| High HP dedicated rental | $14,000/wk · $34,000/mo | Most popular: 25+ acres, heavy stems, deadlines |
| Mid-size dedicated rental | $11,000/wk · $32,000/mo | Lighter brush, 10–25 acre projects |
| CAT 275 XE rental | $1,750/day · $8,000/wk | Under 15 acres, tight access |
| Turnkey, high-HP with operator | $4,000/day + transport | Big acreage, no operator |
| Turnkey, skid steer with operator | $3,000/day incl. transport | Small projects, hands-off |
Rates are the same in every market we serve. See the full rate card for what the rate excludes and how transport is quoted.
Machines we send to Waco
Mixed oak, cedar and pasture regrowth around Waco span a wide range of jobs. Here is the fleet and where each machine fits.
- Barko 930B — high-horsepower dedicated mulcher
- Tigercat M726G — high-horsepower dedicated mulcher
- Weiler M860A — high-horsepower dedicated mulcher
- CAT 275 XE + FAE forestry mulcher — skid steer, tight access
- Primetech PT-175 — mid-size dedicated mulcher
- CMI 175 — mid-size dedicated mulcher
- Fecon 150 — mid-size dedicated mulcher
Insurance for Waco rentals
Dedicated machines: $500,000 inland marine + $2,000,000 general liability. CAT 275 XE: $250,000 inland marine + $2,000,000 general liability. Turnkey service requires none of it. Full requirements →
Waco forestry mulching questions
Rates are the same across Texas: high-HP dedicated mulchers at $14,000/week, mid-size dedicated at $11,000/week, and the CAT 275 XE at $1,750/day or $8,000/week. Transport to McLennan County is quoted separately by distance. See the full rate card.
Yes. Our operators run high-HP dedicated mulching at $4,000 per 8-hour day plus transport, or skid steer mulching at $3,000/day with transport included. The corridor’s growth means both contractors and landowners are clearing at record pace. Builders with crews rent mid-size machines by the week; landowners a few miles off the interstate usually take turnkey and get finished results without touching a machine.
Dedicated mulchers require $500,000 inland marine coverage and $2,000,000 general liability; the CAT 275 XE requires $250,000 inland marine and $2,000,000 general liability. Certificates must name Pierce Equipment Rentals as loss payee and additional insured before delivery. Our insurance guide walks through getting certificates issued fast.
Subdivision and commercial phases along I-35, Brazos and Bosque bottom clearing, cedar ridge work west of town, and university-area and infill tracts. Waco covers three different vegetation types, so location within the county matters more to the quote than acreage.
Clearing land near Waco? Let's talk.
Acreage, vegetation, dates. One call gets you a machine recommendation and a delivered quote.