Forestry Mulcher Rental in Temple, TX
Bell County is catching Austin’s growth wave, and Temple’s medical-and-rail economy is clearing land in every direction, including some of the state’s biggest solar builds.
What gets cleared around Temple
- Utility-scale solar site clearing
- Subdivision phases across Bell County
- Industrial and rail-served site prep
- Ranch and homestead clearing east and west
Bell County sits on the Blackland Prairie with the Lampasas Cut Plain rising to the west, and that boundary decides the job. East of Temple it is deep black clay carrying post oak, elm and heavy secondary regrowth, and the clay is what governs the schedule — wet, it will rut a pad site badly. West toward the cut plain the ground turns rocky and juniper takes over. Bell County also hosts some of the largest utility-scale solar builds in the state, and that work is sequenced against civil crews rather than seasons.
A utility-scale solar build is schedule work. The footprint comes off in phases tied to the construction calendar, cleared to a grade survey and racking crews can work from, usually on monthly machine time. If that is your project, start on the solar site clearing page.
The right machine for Temple projects
Bell County’s solar sites are exactly what the high-HP fleet exists for: hundreds of acres on civil schedules. Subdivision and homestead work runs the usual split, mid-size for acreage, the 275 XE for small tracts.
Not sure where your project lands? The machine finder applies the same logic in seven questions, or read the full decision guide.
Rent the machine, or hire it done
The corridor’s growth means both contractors and landowners are clearing at record pace. Builders with crews rent mid-size machines by the week; landowners a few miles off the interstate usually take turnkey and get finished results without touching a machine. The honest math on both paths is in our rent vs hire guide.
The forestry mulching cost guide covers what the work costs per acre around Temple, and the Weiler M860A rate sheet lists rental and turnkey pricing side by side.
| Option | Rate | Best for |
|---|---|---|
| High HP dedicated rental | $14,000/wk · $34,000/mo | Most popular: 25+ acres, heavy stems, deadlines |
| Mid-size dedicated rental | $11,000/wk · $32,000/mo | Lighter brush, 10–25 acre projects |
| CAT 275 XE rental | $1,750/day · $8,000/wk | Under 15 acres, tight access |
| Turnkey, high-HP with operator | $4,000/day + transport | Big acreage, no operator |
| Turnkey, skid steer with operator | $3,000/day incl. transport | Small projects, hands-off |
Machines we send to Temple
Mixed oak, cedar and pasture regrowth around Temple span a wide range of jobs. Here is the fleet and where each machine fits.
- Barko 930B — high-horsepower dedicated mulcher
- Tigercat M726G — high-horsepower dedicated mulcher
- Weiler M860A — high-horsepower dedicated mulcher
- CAT 275 XE + FAE forestry mulcher — skid steer, tight access
- Primetech PT-175 — mid-size dedicated mulcher
- CMI 175 — mid-size dedicated mulcher
- Fecon 150 — mid-size dedicated mulcher
Insurance for Temple rentals
Dedicated machines: $500,000 inland marine + $2,000,000 general liability. CAT 275 XE: $250,000 inland marine + $2,000,000 general liability. Turnkey service requires none of it. Full requirements →
Temple forestry mulching questions
Rates are the same across Texas: high-HP dedicated mulchers at $14,000/week, mid-size dedicated at $11,000/week, and the CAT 275 XE at $1,750/day or $8,000/week. Transport to Bell County is quoted separately by distance. See the full rate card.
Yes. Our operators run high-HP dedicated mulching at $4,000 per 8-hour day plus transport, or skid steer mulching at $3,000/day with transport included. The corridor’s growth means both contractors and landowners are clearing at record pace. Builders with crews rent mid-size machines by the week; landowners a few miles off the interstate usually take turnkey and get finished results without touching a machine.
Dedicated mulchers require $500,000 inland marine coverage and $2,000,000 general liability; the CAT 275 XE requires $250,000 inland marine and $2,000,000 general liability. Certificates must name Pierce Equipment Rentals as loss payee and additional insured before delivery. Our insurance guide walks through getting certificates issued fast.
Utility-scale solar site clearing, subdivision phases across Bell County, industrial and rail-served site prep, and ranch and homestead clearing on both sides of the county. Which side of the prairie-to-cut-plain line a tract sits on changes both machine and schedule.
Nearby service areas
Clearing land near Temple? Let's talk.
Acreage, vegetation, dates. One call gets you a machine recommendation and a delivered quote.