Forestry Mulcher Rental in Nacogdoches, TX
The oldest town in Texas sits in some of its thickest woods. Nacogdoches clearing means yaupon walls, sweetgum regrowth, and red-clay ground that stays greasy after rain.
What gets cleared around Nacogdoches
- Yaupon and sweetgum understory eradication
- Timberland edge and pasture recovery
- University-area and in-town wooded lots
- Farm access and fence line clearing
Nacogdoches County is deep sandy hills over Attoyac and Angelina bottomland. Alongside plantation and pasture work, a lot of the demand here is hunting lease improvement: senderos, shooting lanes, food plot edges, and opening the understory enough to see through without taking the canopy off the stand.
The right machine for Nacogdoches projects
Understory eradication is mulcher work at any scale: the 275 XE for in-town lots, the PT-175 on acreage where its low ground pressure earns its keep on wet clay.
Not sure where your project lands? The machine finder applies the same logic in seven questions, or read the full decision guide.
Rent the machine, or hire it done
Timber operators here run equipment for a living and mostly rent. If your project is a homesite or a family place rather than a working timber operation, turnkey saves you the insurance and transport learning curve. The honest math on both paths is in our rent vs hire guide.
The forestry mulching cost guide covers what the work costs per acre around Nacogdoches, and the Weiler M860A rate sheet lists rental and turnkey pricing side by side.
| Option | Rate | Best for |
|---|---|---|
| High HP dedicated rental | $14,000/wk · $34,000/mo | Most popular: 25+ acres, heavy stems, deadlines |
| Mid-size dedicated rental | $11,000/wk · $32,000/mo | Lighter brush, 10–25 acre projects |
| CAT 275 XE rental | $1,750/day · $8,000/wk | Under 15 acres, tight access |
| Turnkey, high-HP with operator | $4,000/day + transport | Big acreage, no operator |
| Turnkey, skid steer with operator | $3,000/day incl. transport | Small projects, hands-off |
Machines we send to Nacogdoches
Pine regeneration, sweetgum and heavy understory around Nacogdoches favour a big head and steady flow. This is the fleet and where each machine fits.
- Barko 930B — high-horsepower dedicated mulcher
- Tigercat M726G — high-horsepower dedicated mulcher
- Weiler M860A — high-horsepower dedicated mulcher
- CAT 275 XE + FAE forestry mulcher — skid steer, tight access
- Primetech PT-175 — mid-size dedicated mulcher
- CMI 175 — mid-size dedicated mulcher
- Fecon 150 — mid-size dedicated mulcher
Insurance for Nacogdoches rentals
Dedicated machines: $500,000 inland marine + $2,000,000 general liability. CAT 275 XE: $250,000 inland marine + $2,000,000 general liability. Turnkey service requires none of it. Full requirements →
Nacogdoches forestry mulching questions
Rates are the same across Texas: high-HP dedicated mulchers at $14,000/week, mid-size dedicated at $11,000/week, and the CAT 275 XE at $1,750/day or $8,000/week. Transport to Nacogdoches County is quoted separately by distance. See the full rate card.
Yes. Our operators run high-HP dedicated mulching at $4,000 per 8-hour day plus transport, or skid steer mulching at $3,000/day with transport included. Timber operators here run equipment for a living and mostly rent. If your project is a homesite or a family place rather than a working timber operation, turnkey saves you the insurance and transport learning curve.
Dedicated mulchers require $500,000 inland marine coverage and $2,000,000 general liability; the CAT 275 XE requires $250,000 inland marine and $2,000,000 general liability. Certificates must name Pierce Equipment Rentals as loss payee and additional insured before delivery. Our insurance guide walks through getting certificates issued fast.
Hunting lease work drives a lot of the mulching around Nacogdoches. Cutting senderos and food plot edges is a few days of machine time rather than a full clearing job, which is why leaseholders here tend to rent for a short window ahead of the season rather than hire a crew.
Clearing land near Nacogdoches? Let's talk.
Acreage, vegetation, dates. One call gets you a machine recommendation and a delivered quote.